3/4IN 3100 PSI 2WB DIEHARD HOSE
- Item Code: T212D
- Unit Size: 1
Description
3/4In 3100Psi Sae100R2At 2 Wire Braid Diehard Hydraulic Hose
Features
Back To Top- DIEHARD™ complies with ISO 6945 method of test for abrasion resistance being less than 10% of the maximum weight loss allowed by EN 853, EN 856 and EN 857.
- DIEHARD™ has a synthetic rubber cover that is extra resistant to abrasion and complies with Flame Resistant and Anti?Static (FRAS) requirements of AS 2660 methods of test AS 1180.10B and AS 1180.13A, also meeting USA MSHA requirements.
- PERFORMANCE: Meets or Exceeds the Performance Requirements of: AS 3791 100R2AT, DIN 20022 - 2SN, EN 853 Type 2SN, ISO 1436 Types R2AT & 2SN, SAE 100R2AT.
- RECOMMENDED FOR: High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses.
- TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F).
- WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor
Tech Specs
Back To Top| Average weight (LB/FT) | 0.62 |
|---|---|
| Hose OD (inches) | 1.15 |
| Hose Size (inch) | 3/4 |
| Max Working Pressure (PSI) | 3100 |
| Minimum Bend Radius (Inches) | 9.5 |
| Minimum Burst Pressure (PSI) | 12400 |
