1IN BOSS CLAMP 1-34/64IN - 1-46/64IN
- Item Code: BU14
- Unit Size: 1
Description
1 inch Boss™ Clamp 4 Bolt Type, 2 Gripping Fingers
Features
Back To Top- Always tighten bolts to their specified torque value.
- Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter.
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses.
- Boss Clamps are for single use only! Once removed they are to be discarded.
- Recommended for steam service up to 450°F (232°C).
Tech Specs
Back To Top| Hose ID | 1" (25mm) |
|---|---|
| Hose OD From | 1-34/64" (38.9mm) |
| Hose OD To | 1-46/64" (43.7mm) |
| Material | Zinc Plated Iron |
| Torque | 21 ft. lbs. |
| Weight Lb | 1.680 |
